© Polycom, Inc. 2003 57
3
Initial System Setup
This chapter describes the initial system configuration screens that
you see when you power on your ViewStation EX for the first time.
Topics in This Chapter
The following topics are included in this chapter.
Topic Description Page
First System
Screens
This section describes the first system
screens that are displayed during the initial
out-of-box configuration.
59
Initial Setup
for IP (H.323)
Calls
This section describes the initial
IP-specific screens needed to configure
basic network settings.
64
Initial Setup
for ISDN
(H.320) Calls
This sections describes the initial screens
used to configure your ISDN connection
(V.35/RS-449/RS-530 or BRI)
68
Final
Out-of-Box
System Setup
Screens
The screens that complete the initial
configuration sequence are covered in this
section.
77
Setting up the
Firewall
This section indicates where to find the
appropriate firewall configuration
information, if you need to set up a firewall.
79
Verifying
Initial Setup
This section provides information about
placing a test call and checking network
connectivity.
80