Filter
Top Products
Scanning
WorkCentre 6400 Multifunction Printer
User Guide
148
Scan to Home
The Scan to Home feature allows you to scan a document to your home directory. This feature must be
enabled by your system administrator.
To use the Scan to Home feature:
1. On the printer’s control panel, press the Services Home button.
2. From All Templates, select Network Templates and then select the template created by your
system administrator.
3. The template defines the scan settings as well as the destination of the image. To change any of
the scan settings, use the four tabs at the bottom of the control panel, Output Color, 2-Sided
Scanning, Original Type and Scan Presets, to select the desired options for the scan. For more
information see Setting Scan Options on page 149.
4. Place the document original in the document feeder or on the document glass, and then press the
Start button.
Note: If Scan to Home is not enabled, contact your system administrator. For more information,
see the System Administrator Guide.