Filter
Top Products
Printing
WorkCentre 6400 Multifunction Printer
User Guide
55
• In the printer driver, select either Labels as the paper type or Tray 1 as the paper source.
Printing on Glossy Paper
Print glossy paper single-sided only and from Tray 1.
To order paper, transparencies, or other specialty media, contact your local reseller or go to the Xerox
Supplies website for your printer: www.xerox.com/office/WC6400supplies.
Guidelines
• Do not open sealed packages of glossy paper until you are ready to load them into the printer.
• Leave glossy paper in the original wrapper, and store unopened packages in the original shipping
carton until ready to use.
• Remove all other paper from the tray before loading glossy paper.
• Load only the amount of glossy paper you plan to use and remove the unused portion from the
tray when you are finished printing. Replace the unused portion in the original wrapper and seal for
later use.
• Rotate stock frequently. Long periods of storage in extreme conditions can cause glossy paper to
curl and jam in the printer.
• In the printer driver, select either Gloss Coating or Heavyweight Gloss Coating as the paper type,
or Tray 1 as the paper source.
Printing on Custom Size Paper
In addition to the wide variety of standard paper sizes that you can use for printing, you can also print
on custom size paper within the following dimensions.
Note: Print custom size paper from Tray 1 only. If inserted one page at a time, long edge 2-sided
paper can be up to 356 mm (14.0 in.)
Single Sided Printing 2-Sided Printing
Short edge 92–216 mm (3.6–8.5 in.) 176–216 mm (7.0–8.5 in.)
Long edge 148–356 mm (5.8–14.0 in.) 257–300 mm (10.1–11.8 in.)
Weight
60–210 g/m
2
60–150 g/m
2