Filter
Top Products
x Introduction
Safety notes (continued)
Maintenance safety (continued)
12. Never push objects of any kind into the slots of the units as they
may touch dangerous voltage points or short out parts that could
result in a risk of fire or electric shock.
13. Never spill liquid of any kind on the units.
14. Never remove any covers or guards that require a tool for
removal. There are no operator serviceable areas within these
covers.
15. Never attempt any maintenance function that is not specified in
this operator guide.
16. Never defeat interlock switches. Machines are designed to
prevent operator access to unsafe areas. Covers, guards, and
interlock switches are provided to ensure that the system will not
operate with the covers opened.
17. If the power plug is used as a disconnect device, instructions
shall comply with UL 1950 Sec. 1.7.2. The power switch does
not break power to the low voltage power supply.
18. Unplug the reprographic system from the wall outlet and call for
service under the following conditions:
• When the power cord is damaged or frayed.
• If the gas piston springs in the upper cover of the printer lose
their strength.
• If liquid has been spilled into the product.
• If the units have been exposed to rain or water.
• If the units are producing unusual noises or odors.
• If the units or the cabinets have been damaged.
19. If you need additional safety information concerning the MAX 200
or XES supply materials, call:
United States
Xerox Hotline
1-800-828-6571.
In other countries Please call your local Xerox Engineering
Systems service representative for help.
Ozone safety
This product produces ozone during normal operation. The ozone
produced is heavier than the air and quantity is dependent on the
copy volume. Providing the proper environmental parameter, as
specified in Xerox Engineering System installation procedures, will
ensure that concentration levels meet safe limits.
If additional information concerning ozone is needed, request the
Xerox publication Ozone, 600P83222. Please call your Xerox
Engineering Systems representative.