Filter
Top Products
198 How to customize the MAX 200
How to change the copy features (continued)
Stamp location and orientation
Introduction
The stamp location and orientation feature sets up the stamp
location and orientation, for each media size and feed direction for
the stamper auto option. The auto option is on page 151.
To learn how to create a stamp pattern, refer to page 237.
Stamp location Auto
Sets up the stamp location parameters for the auto
option on page 151.
Stamp orientation Normal
-
270
o
Sets up the auto stamp orientation for the auto option on
page 151.
Procedure
1. Enter custom presets. If needed, refer to page 174.
2. Select the copy features tab.
3. Use the arrow buttons to select the stamp location and
orientation feature.
4. Select open.
The stamp location and orientation screen is displayed
Press [Custom Presets] to return to
Previous screen.
Reduce/Enlarge Presets
Media Type and Width for Auto Mode
Stamp Location and Orientation
Date Stamp Format
Folder Setup
A
uto/ Manual Mode
Media Cut Mode and Document Orientation
Lead/Trail Edge Default Synchro
System features
Copy features
Storage/Dis
k
Manager
Open