Filter
Top Products
How to make copies 57
In auto mode
Note: When the selected feed direction is landscape, the E size row
and column on the auto mode panel is not available. The maximum
document width for scan is 36 inches, an E size landscape
document width is 44 inches.
Note: To go directly to the auto mode procedure, go to page 58.
Introduction
When MAX 200 is in auto mode, all output lengths are based on the
standard paper size set in Custom Presets, 8.5 inch or 9 inch.
The following features are available for auto mode:
• Auto R/E – Copies are printed automatically reduced or
enlarged per your selection
• Auto 100% - Copy at 100%
• Cut roll media – Standard or synchronize
• Add/remove margins – you can add up to 999 mm or remove
up to 90 mm margins in 1 mm increments to either the lead or
trail edge of your copy (enabled with synchronize)
Auto R/E
For example, you want all of your documents to be printed on C-size
media (shaded buttons), but your input documents are a combination
of different size drawings (E, D, C, B and A).
First select C-size media under each document size. The machine
then automatically reduces the E and D-sizes to C-size, the C-size
document is copied at 100%, and the B and A-size documents are
enlarged to C-size.
E E E E E
D D D D D
C C C C C
B B B B B
A A A A A
EDCBA