Filter
Top Products
60 How to make copies
In manual mode
Introduction
When MAX 200 is in manual mode, all output lengths are based on
the same auto mode standard sizes and the nonstandard size
30 x 42 inch.
The following features are available for manual mode:
• Manual 100% - Copy at 100%
• Manual R/E – Reduce or enlarge your copies from 25% to 400%,
0.1% increments are available
• Cut roll media – Standard, synchronized, long copy or variable
length
• Add/remove margins – you can add up to 999 mm or remove
up to 90 mm margins in 1 mm increments to either the lead or
trail edge of your copy (enabled with synchronize and long copy)
• Manual feed mode – Enable the manual feed tray
Documents can be scanned, short edge or long edge feed. If the
scanned document size does not match the selected magnification
and output media size, an error message is displayed.