Filter
Top Products
168 How to customize the MAX 200
Identifying the system features
This section provides a identifies the custom presets system
features. The factory default is shown bold.
Feature Feature description and options
Time & date, page 176. Sets up the current time and date for the machine.
Options: Year, Month, Day, Hour, Minute (2000,1,21,0,0).
Auto power off, page 177. The machine automatically turns off after the preset time has elapsed.
Options: No, 1, 2, 3, 4, 5 Hours.
Power save, page 178 The machine automatically reduces machine power consumption
when the machine is not used for a selected period of time.
Options: No, 1, 3, 5, 10, 20, 30 minutes.
After the preset time has elapsed, the machine automatically returns to
the custom presets default settings.
After the preset time has elapsed, the touch screen backlight will turn
off.
Auto clear/backlight off,
page 179.
Auto clear
Backlight off
Each of these features can be on or off. The option times apply to
each feature.
Options: No, 30 sec., 1 minute, 1 minute 30 sec., 2 minutes,
2 minutes 30 sec., 3 minutes.
Attention tone, page 182. Alerts the user when an accepted or unaccepted button is pressed.
Options: on or off.
Normal one beep sounds when a button is pressed.
Alarm two beeps when an unacceptable button is
pressed.
Ready to copy when the warm-up cycle is complete,
when the machine beeps.
Document width, page
181.
Sets up the document width series the scanner recognizes.
Options: 8.5 inch 9 inch