Filter
Top Products
Getting to know the MAX 200 31
Printer control panel (continued)
Messages (continued)
Message On condition
Remove output from
folder
When the machine detects the folder is full.
Relatch fuser
When the fuser is not correctly positioned.
Replace fuser web
When the fuser web needs to be replaced. To replace the web, call
for service.
Load media indicated
below
Load media indicated below is displayed, when the machine detects
the selected media supply is empty.
The following media information is also displayed:
• Media series window displays the media series
• Roll or paper
• The type of media; vellum, bond or film
Made
The made window displays the number of copies made. Increments
by one.
Selected
The selected window displays the copy quantity selected.
Increasing Toner
When the machine starts to increase toner.
Diagnostics
When the machine is in diagnostic mode.
Clear Jam
When the machine detects a media jam. Check the printer diagram
for the location of the jam.