Filter
Top Products
38 Getting to know the MAX 200
Media type and series panel
There are four media type and series panels, one for each roll. They
are located next to each roll in the RFC drawer. This section
provides an overview of the media type and series panel
components.
For detailed information about the RFC media specifications, refer to
the appropriate chart in Media, starting on page 43.
Name Function
Media series Set the dial to the correct media series.
When the drawer is closed, the RFC panel window
displays the media series.
Media type Set the dial to the correct media type.
When the drawer is closed, the RFC panel displays
the media type.
Window Function
When the drawer detects media the indicator lights.
Note: The media type and series panel in this
example is for roll 1.
Media series panel (tray 5)
The media series panel is located in the cut sheet tray, tray 5.
For detailed information about the cut sheet tray media
specifications, refer to the appropriate chart in Media, starting on
page 43.
Note: Only bond media can be loaded into tray 5.
Name Function
Media series Set the dial to the correct media series.
When the tray is closed, the cut sheet panel
window displays the media width for the selected
series.