Filter
Top Products
How to customize the MAX 200 223
How to change the copy features (continued)
Image density
Introduction
The image density feature sets up the image density default on the
image density screen, located on page 87.
Procedure
1. Enter custom presets. If needed, refer to page 174.
2. Select the copy features tab.
3. Use the arrow buttons to select the image density feature.
4. Select open.
The image density screen is displayed.
5. Use the arrow buttons to set the default image density for black
and red.
6. Select done to store your changes and exit from this screen.
To cancel the changes and exit from this screen, select cancel.
7. To exit, press the custom presets button.
Press [Custom Presets] to return to
Previous screen.
Date Stamp Format
Folder Setup
A
uto/ Manual Mode
Media Cut Mode and Document
Orientation
Lead/Trail Edge Default Synchro
Variable length default
Background Suppression Level Default
Image Density
System features
Copy features
Storage/Dis
k
Manager
Open
Custom Presets
Image Density Cancel Done
Black
Lighter
Normal
Darker
Normal
Red