Filter
Top Products
Technical data 281
Media specifications
Roll media Cut media Manual feed tray media
Media size
ISO, E, D, C, B, A size
widths
8.5 x 11 inch to
12 x 18 inch, long edge
or short edge feed.
ISO, E, D, C, B, A, size widths
Media weight
20 lb. 20 to 24 lb. 20 lb.
Media type
Bond, vellum, film Bond Bond, vellum, film
System capability
Scanner resolution
15.7 dots/mm (400 dpi)
Warm-up time
Max. 5 minutes (when breaker switch is held ON)
First copy output time
20 seconds for E
Lead edge registration
Roll ± 3.0 mm
Cut sheet B ± 2 mm
Cut sheet A ± 0.5 mm
Side registration
Maximum of ± 1.5 mm difference in multiple prints.
Skew
Maximum of 1. 5 mm per 200 mm length
Lead edge deletion
Roll media (outside diameter of 100 mm or greater) = 5 mm
Roll media (outside diameter of less than 100 mm) = 5 mm
Cut sheet = 5 mm
Trail edge deletion
Roll media (outside diameter of 100 mm or greater) = 5 mm
Roll media (outside diameter of less than 100 mm) = 5 mm
Cut sheet = 5 mm
Image area size
880 mm wide
Continuous prints (per
minute)
A: 29 minimum SEF, 36.5 minimum LEF
B: 22.2 minimum SEF, 29 minimum LEF
C: 16.9 minimum SEF, 22.2 minimum LEF
D: 12.5 minimum SEF, 16. 9 minimum LEF
E: 9.1 minimum SEF
Copy output tray
capacity (printer)
100 E-size sheets
Document exit tray
(scanner)
50 D-size sheets
50 E-size sheets with extension bar pulled out
Document size
36 inch maximum width
0.05 mm to 0.2 mm thickness