Filter
Top Products
Finishing touch screen features 141
Stamper (continued)
Numbering
Note: Ensure your loaded stamp pattern has enough room to
include the numbering stamp. All stamp patterns can not exceed
70 mm squared = 4900 mm
2
.
Note: If you do not want an image stamped on your drawing, but
you do want to use the numbering feature, create a blank stamp.
Introduction
The numbering stamp feature allows you to create the numbering
stamp and insert it into an existing stamp pattern.
The numbering stamp may contain a maximum of 12 alphanumeric
characters. The font used for all characters is 14 point gothic, and
can not be changed.
There are two numbering options available; fixed and sequential.
Option Function
Fixed
The maximum number of characters is twelve. The
same characters are printed on all copies. Refer to
page 142.
Sequential
The maximum number of characters is twelve. The
first 8 characters are printed on all copies, the next
4 characters are the number of the copy, within the
set. Refer to page 144.
The sequential feature is only enabled when the
collated E-sorter option is selected.
Numberin
g
stam
p