Filter
Top Products
216 How to customize the MAX 200
How to change the copy features (continued)
Lead/trail edge default for synchronized
Introduction
The lead/trail edge default for synchronized feature sets up the
lead and trail edge default margins for synchronized and long copy.
Procedure
1. Enter custom presets. If needed, refer to page 174.
2. Select the copy features tab.
3. Use the arrow buttons to select the lead/trail edge default for
synchronize feature.
4. Select open.
The lead/trail edge default for synchronize screen is
displayed.
Press [Custom Presets] to return to
Previous screen.
Reduce/Enlarge Presets
Media Type and Width for Auto Mode
Stamp Location and Orientation
Date Stamp Format
Folder Setup
A
uto/ Manual Mode
Media Cut Mode and Document
Orientation
Lead/Trail Edge Default Synchro
System features
Copy features
Storage/Dis
k
Manager
Open