Filter
Top Products
42 MAX 200 power
Warm-up
When the MAX 200 is switched on, the machine enters a warm-up
cycle and the please wait message is displayed on the touch screen
and the printer control panel. The warm-up cycle is approximately 5
minutes at 72
o
C, 55% humidity.
During the warm-up cycle the scanner does not respond to button
selections. When the ready to copy message is displayed on the
touch screen and ready to copy/print is displayed on the printer,
you can begin to scan documents or select any touch screen feature
or option.
Auto power-off mode
When the machine is not used for a selected period of time, the auto
power-off feature switches the machine power to off. To exit the auto
power-off mode, you must power-on the machine. For detailed
information on how to power-on the MAX 200, refer to page 39.
Once the machine completes the warm-up cycle, and the ready to
copy message is displayed, you may begin copying again.
The auto power-off timer can be set from 1 to 5 hours, or the feature
can be disabled entirely by entering No minutes. The factory default
is set to No minutes.
For detailed information on how to change the auto power-off mode
default, refer to page 177.
Power save
The power save function reduces machine power consumption when
the machine is not used for a selected period of time. The current to
the fuser is reduced, and the electrical control signals (except the
control panels) are switched off.
To exit the power save mode press the power save button, located
on the scanner control panel.
Once the machine completes the warm-up cycle, and the ready to
copy message is displayed, you may begin coping again.
The power save timer can be set from 1 to 30 minutes, or the feature
can be disabled entirely by entering No minutes. The factory default
is set to No minutes.
For detailed information on how to change the power save default,
refer to page 178.