Filter
Top Products
Basic touch screen features 91
Print color (continued)
Two color (black and red)
Note: This option is automatically enabled, if you set any of the copy
features to recognize a specific color on your document to be printed
red.
Procedure
1. Select the basic feature group tab. If needed, refer to page 68.
2. Select the print color button, on the basic screen.
The print color screen is displayed.
3. Select black/red.
4. Select scanner color (specifies the color on the document to be
printed in red).
The scanned color screen is displayed.
5. Select the desired colors, to be copied in red. To cancel a color
selection, press the same color button again.
• Multiply colors can be selected.
• Others specify colors other than red, blue, green, yellow,
and black.
To cancel the changes and exit from this screen, select cancel.
6. Insert the document to make copies, or select done as required
to select additional features.
Ready to cop
y
Load documents face down
Selected
01
Scanned Color
Cancel Done
Red
Blue
Green
Yellow
Others
Black
One or more colors in the original document
may be copied in red
A
ll others will be copied in black
Ready to cop
y
Load documents face down
Selected
01
Print Color
Cancel Done
Black/Red
Red Only
Black Only
Scanned
Co
l
or
Printed as Red
Printed All in
Black and Red
Press [Scanned
Color] to select
document color(s)
to be printed in red.
Red