Filter
Top Products
132 Zebra XiIIIPlus Users Guide
Appendixes
Troubleshooting
$GGLWLRQDO3ULQWHU6HOI7HVWV
These self tests produce sample printouts and provide specific information that help
determine the operating conditions for the printer.
Each self test is enabled by pressing a specific front panel key or combination of keys
while turning the POWER On (I). Keep the key(s) depressed until the DATA light
turns off. When the POST is complete, the selected self test starts automatically.
&$1&(/6HOI7HVW
The CANCEL self test prints a configuration label. The configuration label tells you
the current settings for the printer.
7RSHUIRUPWKH&$1&(/6HOI7HVWFRPSOHWHWKHVHVWHSV
1. Turn the printer Off (O).
2. Press and hold CANCEL while turning the powerOn (I). Hold CANCEL until the
DATA light turns off.
Note • When performing a self test, do not send a label format to the printer.
For remote hosts, disconnect all data interface cables from the printer.
For printers in Peel-Off Mode, remove the labels as they come out of the printer.
Caution • Be sure that the print width is set to match the label width you are
using before running any self tests. If the labels are not wide enough, the test may
print on the platen roller and damage it.