Filter
Top Products
Labels and Print Modes
Print Mode Choices
Zebra XiIIIPlus Users Guide 27
The callouts in the illustration and the following table identify the parts of the
printer and rewind plate.
2. Position the rewind plate so the lip on the attached hook plate points down.
3. Insert the hook plate lip a short distance (1/2 in. or 13 mm) into the lower opening
in the side plate.
4. Align the upper end of the rewind plate with the matching opening in the side
plate.
5. Slide in the rewind plate until it stops against the printer’s main frame.
6. Open the printhead.
7. Slide the media guide and media supply guide as far from the printer frame as
possible. Flip down the media supply guide.
&DOORXW 'HVFULSWLRQ
Rewind plate
Lip
Adjustable hook plate
Slots
1
3
4
2