Filter
Top Products
Appendixes
Front Panel Controls
Zebra XiIIIPlus Users Guide 77
'(/,0,7(5
&+$5
Delimiter Character:
1. Press the left black oval to move to the next digit
position.
2. Press the right black oval to increase the value of
the digit.
Default: 2C (comma)
Range: 00–FF
The delimiter character is a 2-digit hex value used as
a parameter place marker in ZPL/ZPL II format
instructions. See the ZPL II Programming Guide
Volume I for more information.
Note • Do not use the same hex value for the
control, format, and delimiter character. The printer
must see different characters to work properly.
=3/02'(
Selecting ZPL Mode: Press the right or left black
oval to display other choices.
Default: ZPL II
Selections: ZPL II, ZPL
The printer remains in the selected mode until it is
changed by this front panel instruction or by using a
ZPL/ZPL II command. The printer accepts label
formats written in either ZPL or ZPL II. This
eliminates the need to rewrite any ZPL formats you
already have. See the ZPL II Programming Guide for
more information on the differences between ZPL
and ZPL II.
3UHVV /&' 'HVFULSWLRQ