Filter
Top Products
Data Ports
Standard Ports
Zebra XiIIIPlus Users Guide 41
6HULDOSLQFRQILJXUDWLRQ
The table below shows the pin configuration and function of the rear panel serial data
connector on the printer.
3LQ1R 1DPH 'HVFULSWLRQ
1 — Not connected
2 RXD Receive data—data input to printer
3 TXD Transmit data—data output from printer
4 DTR Data terminal ready—output from printer
5 SG Signal ground
6 DSR Data set ready—input to printer
7 RTS Request to send—output from printer
8 CTS Clear to send—input to printer
9+5
VDC
+5 VDC signal output
Note • This pin is also available as a +5 VDC power
source at 750 mA. The maximum current draw
may be limited by option configuration. To enable
this capability, a jumper on the computer’s main
logic board needs to be installed on JP1, pins 2
and 3.
Note • An interface module is required for RS-422/RS-485 interface support (see RS-422/
RS-485 Interconnections on page 45).