Filter
Top Products
Appendixes
Troubleshooting
Zebra XiIIIPlus Users Guide 127
2XWRI0HPRU\
3ULQW4XDOLW\3UREOHPV
*HQHUDO3ULQW4XDOLW\,VVXHV
&DXVH 6ROXWLRQ
There is not enough memory to
perform the function shown on the
second line of the error message.
Shut off the printer to clear memory and
try to print again.
If the error recurs, there is insufficient
memory for the label length, downloaded
fonts or graphics, and images.
Ensure that the device, such as Flash
memory or PCMCIA card, is installed and
not write-protected or full.
Ensure that the data is not directed to a
device that is not installed or available.
&DXVH 6ROXWLRQ
You are using an incorrect labels and
ribbon combination for your
application.
Consult your authorized Zebra reseller
ordistributor for information and advice.
The printer is set at the incorrect print
speed.
For optimal print quality, set the print speed
to the lowest possible setting via ZPL II, the
driver, or the software.
The printer is set at the incorrect
darkness level.
For optimal print quality, set the darkness to
the lowest possible setting via the front
panel, the driver, or the software.