Filter
Top Products
76 Zebra XiIIIPlus Users Guide
Appendixes
Front Panel Controls
&21752/
35(),;
Control Prefix Character:
1. Press the left black oval to move to the next digit
position.
2. Press the right black oval to increase the value of
the digit.
Default: 7E (tilde—displayed as a black square)
Range: 00–FF
The printer looks for this two-digit hex character to
indicate the start of a ZPL/ZPL II control instruction.
Note • Do not use the same hex value for the
control, format, and delimiter character. The printer
must see different characters to work properly.
)250$7
35(),;
Format Prefix Character:
1. Press the left black oval to move to the next digit
position.
2. Press the right black oval to increase the value of
the digit.
Default: 5E (caret)
Range: 00–FF
The format prefix is a two-digit hex value used as a
parameter place marker in ZPL/ZPL II format
instructions. The printer looks for this 2-digit hex
character to indicate the start of a ZPL/ZPL II format
instruction. See the ZPL II Programming Guide
Volume I for more information.
Note • Do not use the same hex value for the
control, format, and delimiter character. The printer
must see different characters to work properly.
3UHVV /&' 'HVFULSWLRQ