Filter
Top Products
Appendixes
Specifications and Care
Zebra XiIIIPlus Users Guide 101
5LEERQ6SHFLILFDWLRQVE\0RGHO
;L,,,3OXV;LIII3OXV
Note • Match the ribbon to the label width and printhead width you are using.
Ribbon must be wound with the coated side out.
Ribbon should be at least as wide as the labels to protect the
printhead from excessive wear.
6SHFLILFDWLRQV ;LIII3OXV
;LIII3OXV
;LIII3OXV
Printhead
resolution
203 dots/inch
(8 dots/mm)
300 dots/inch
(12 dots/mm)
600 dots/inch
(24 dots/mm)
Ribbon width
Minimum
0.79 in
. (20 mm) 0.79 in. (20 mm) 0.79 in. (20 mm)
Ribbon width
Maximum
4.33 in. (110 mm) 4.33 in. (110 mm) 3.40 in. (87 mm)
Standard length
with 2:1 label to
ribbon ratio
984 ft
. (300 m) 984 ft. (300 m) 984 ft. (300 m)
Standard length
with 3:1 label to
ribbon ratio
1476 ft. (450 m) 1476 ft. (450 m) 1476 ft. (450 m)
Ribbon core
inside diameter
1.0 in. (25.4 mm) 1.0 in. (25.4 mm) 1.0 in. (25.4 mm)
Maximum ribbon
roll outside
diameter
3.2 in. (81.3 mm) 3.2 in. (81.3 mm) 3.2 in. (81.3 mm)