Filter
Top Products
Appendixes
Front Panel Controls
Zebra XiIIIPlus Users Guide 79
%$&.)(('
Backfeed Sequence: Press the right or left black
oval to display other choices.
Default: Default (90%)
Selections:
Default, after, before, 10%, 20%, 30%,
40%, 50%,
60%, 70%, 80%, off
This parameter establishes when and how much label
backfeed occurs after a label is removed or cut in
Peel-Off, Cutter, and Applicator Modes. It has no
effect in Rewind or Tear-Off Modes. This parameter
setting can be superseded by the ~JS instruction
when received as part of a label format (see the
ZPL II Programming Guide).
Note • The difference between the value entered and
100% establishes how much backfeed occurs before
the next label prints. For example, a value of 40
means that 40% of the backfeed takes place after the
label is removed or cut. The remaining 60% takes
place before the next label prints. A value of %()25(
means that all backfeed takes place before the next
label prints.
/$%(/723
Adjusting Label Top Position: The displayed value
represents dots.
To increase the value, press the right black oval.
To decrease the value, press the left black oval.
Default: +0
Range: –120 to +120 dot rows
The label top position adjusts the print position
vertically on the label. Positive numbers adjust the
label top position further down the label (away from
the printhead), negative numbers adjust the position
up the label (toward the printhead).
3UHVV /&' 'HVFULSWLRQ