Filter
Top Products
Appendixes
Front Panel Controls
Zebra XiIIIPlus Users Guide 75
&20081,&$
7,216
Setting Communications Mode: Press the right or
left black oval to display other choices.
Default: Normal mode
Selections: Normal mode, diagnostics
The communication diagnostics mode is a
troubleshooting tool for checking the interconnection
between the printer and the host computer. When
',$*1267,&6 is selected, all data sent from the host
computer to the printer is printed as straight ASCII
characters, with the hex value below the ASCII text.
The printer prints all characters received, including
control codes, like CR (carriage return). A sample
printout is shown in To perform a FEED and PAUSE
self test, complete these steps: on page 136.
Notes on diagnostic printouts are:
FE indicates a framing error.
OE indicates an overrun error.
PE indicates a parity error.
NE indicates noise.
1. For any errors, check that your communication
parameters are correct.
2. Set the print width equal to or less than the label
width used for the test. See Label Specifications
on page 103 for more information.
3UHVV /&' 'HVFULSWLRQ