Appendixes
Front Panel Controls
Zebra XiIIIPlus Users Guide 61
0(',$7<3(
Setting Media Type: Press either black oval to
display choices.
Default: Continuous
Selections: Continuous, non-continuous
This parameter tells the printer the type of media you
are using. Selecting continuous media requires that
you include a label length instruction in your label
format (^LLxxxx if you are using ZPL or ZPL II).
When non-continuous media is selected, the printer
feeds media to calculate label length (the distance
between two recognized registration points of the
inter-label gap, webbing, or alignment notch or
hole).
6(16257<3(
Setting the Sensor Type: Press either black oval to
display other choices.
Default: Web
Selections: Web, mark
This parameter tells the printer whether you are
using media with a web (gap/space between labels,
notch, or hole) to indicate the separations between
labels or if you are using media with a black mark
printed on the back. If your media does not have
black marks for registration on the back, leave your
printer at the default (web).
3UHVV /&' 'HVFULSWLRQ