Filter
Top Products
Appendixes
Troubleshooting
Zebra XiIIIPlus Users Guide 135
)(('6HOI7HVW
This test helps you choose the best darkness setting for your printer.
7RSHUIRUPD)(('VHOIWHVWFRPSOHWHWKHVHVWHSV
1. Turn off the printer.
2. Press and hold FEED while turning the power On (I). Hold FEED until the Data
light turns off.
This self test prints out a series of labels like the one below at various darkness settings
higher and lower than the darkness value shown on the configuration label.
Inspect these labels and determine which one has the best darkness setting for your
application. This value can be entered into the printer by setting the darkness during
the configuration procedure.
The value printed on that label is added to (plus) or subtracted from (minus) the
darkness value specified on the configuration label. The resulting numeric value (0 to
30) is the best darkness value for that specific label/ribbon combination.