Filter
Top Products
Appendixes
Front Panel Controls
Zebra XiIIIPlus Users Guide 57
)URQW3DQHO/LJKWV
/LJKW 6WDWXV ,QGLFDWHV
POWER Off (O) The printer is off or power is not applied.
On (I) The printer is on.
TAKE LABEL Off Normal operation.
Flashing (Peel-Off Mode only.) The label is available.
Printing is paused until the label is removed.
ERROR Off Normal operation—no printer errors.
Flashing A printer error exists. Check the LCD for more
information.
CHECK RIBBON Off Normal operation—ribbon (if used) is properly
loaded.
On Printing is paused, the LCD shows a warning
message, and the PAUSE light is on.
If the printer is in Direct Thermal Mode: ribbon
is loaded and should not be.
If the printer is in Thermal Transfer Mode: no
ribbon is loaded or the ribbon has run out.
PAPER OUT Off Normal operation—labels are properly loaded.
On No labels are under the media sensor. Printing is
paused, the LCD shows an error message, and
the PAUSE light is on.
PAUSE Off Normal operation.
On The printer has stopped all printing operations.
Either PAUSE was pressed, a pause command
was included in the label format, the online
verifier detected an error, or a printer error was
detected. See the LCD for more information.