Zebra Technologies 3ULQWHUV Printer User Manual


 
Appendixes
Front Panel Controls
Zebra XiIIIPlus Users Guide 73
+267
+$1'6+$.(
Setting Host Handshake: Press the right or left
black oval to display other choices.
Default: XON/XOFF
Selections: XON/XOFF, RTS/CTS, DTR/DSR
The handshake protocol of the printer must match
the handshake protocol of the host computer for
proper communications to take place. Select the
handshake protocol that matches the one being used
by the host computer.
35272&2/
Setting Protocol: Press the right or left black oval to
display other choices.
Default: None
Selections: None, Zebra, ACK/NACK
Protocol is a type of error checking system.
Depending on the selection, an indicator may be sent
from the printer to the host computer signifying that
data has been received. Select the protocol that is
requested by the host computer. Further details on
protocol can be found in the ZPL II Programming
Guide.
Note • Zebra is the same as ACK/NACK, except
that Zebra response messages are sequenced. If
Zebra is selected, printer must use DTR/DSR host
handshake protocol.
3UHVV /&' 'HVFULSWLRQ