Filter
Top Products
60 Zebra XiIIIPlus Users Guide
Appendixes
Front Panel Controls
35,1763(('
Adjusting Print Speed:
Press the right black oval to increase print speed.
Press the left black oval to decrease print speed.
Default: 2 ips
Range: 2 ips to +12 ips (depends on specific printer)
Slower print speeds typically yield better print
quality. Print speed changes take effect upon exiting
the menu mode.
7($52))
Adjusting the Tear-Off Position: Each press of the
black oval adjusts the tear-off position by four dot
rows.
Press the right black oval to increase value.
Press the left black oval to decrease value.
Default: +0
Range: –120 to +120
This parameter establishes the position of the labels
over the tear-off/peel-off bar after printing.
35,1702'(
Selecting Print Mode: Press either black oval to
display choices.
Default: Tear-off
Selections: Tear-off, peel-off, cutter, rewind,
applicator
Print mode settings tell the printer the method of
label delivery you wish to use. Be sure to select a
print mode that your hardware configuration
supports as some of the selections displayed are for
optional printer features.
3UHVV /&' 'HVFULSWLRQ