Filter
Top Products
Memory Cards
CompactFlash Card
Zebra XiIIIPlus Users Guide 51
2. Remove the electronics cover by removing the two screws near the bottom.
3. Lift the electronics cover at the rear top corner as shown and pull the corner
forward and up, then lift the cover up and away from the printer.
4. Insert the CompactFlash card into the card slot on the upper portion of the option
board—the card can be inserted only one way and should snap into place.
Callouts in this illustration and the table that follows show where to insert the
CompactFlash card.
&DOORXW 'HVFULSWLRQ
Electronics cover
Screws
Channel
Lip of cover
&DOORXW 'HVFULSWLRQ
Option board
Card slot
Compact flash card
3
1
2