52 Zebra XiIIIPlus Users Guide
Memory Cards
CompactFlash Card
5. Reinstall the electronics cover by lowering the cover so the lip goes into the
channel on the top of the printer. Secure the cover by reinstalling the two screws on
the bottom of the cover.
6. Reconnect the printer AC power cord.
7. Press and hold CANCEL while turning the printer On (I).
8. Check the presence of additional memory or optional fonts by looking at the
information on the configuration label printed during the power-on sequence.
The printer is now ready to operate with the additional memory or font option.
Note • The CompactFlash card should be inserted with the back (unlabeled) side of
the card facing out.
Note • Initialization of the CompactFlash card may take a few minutes. If the
process is not successfully completed within 10 minutes, contact Zebra Technical
Support at http://www.zebra.com/SS/service_support.httm for assistance.