ZyXEL Communications UNS Series Barcode Reader User Manual


 
Chapter 23 Snapshot
UNS Series User’s Guide
103
23.3.2 The Snapshot Schedule Edit Screen
Click Configuration > Storage Configuration > Snapshot > Snapshot Schedule > Edit to
display the following screen.
Figure 80 Configuration > Storage Configuration > Snapshot > Snapshot Schedule > Edit
The following table describes the labels on this screen.
At (N) o’clock Click the drop-down menu to designate a snapshot time, whereas N designates a
24 hour period.
Every Enter the weekly interval period (1 to 9).
Day Select the day(s) to schedule the snapshot setting.
Back Click Back to go to the previous screen.
OK Click OK to confirm the changes.
Reset Click Reset to discard the changes.
Table 55 Configuration > Storage Configuration > Snapshot > Snapshot Schedule > Set Schedule
LABELS DESCRIPTIONS
Table 56 Configuration > Storage Configuration > Snapshot > Snapshot Schedule > Edit
LABELS DESCRIPTIONS
Schedule setting
ZFS name Click the drop-down menu to select the ZFS dataset for this schedule.
Schedule Type Select Disable, Hourly, Daily, or Weekly to define the snapshot period.
Disable: do not schedule a snapshot.
Hourly: Set the schedule on an hourly interval.
Daily: Set the schedule on a daily interval.
Weekly: Set the schedule on a weekly interval.
At (N) o’clock Click the drop-down menu to designate a snapshot time, whereas N designates a
24 hour period.
Every Enter the weekly interval period (1 to 9).