Filter
Top Products
Chapter 15 Network Setting
UNS Series User’s Guide
61
aggregation takes place, then link aggregation removes VLAN ID setting. In this case, repeat the
configuration steps to set VLAN ID for the aggregation group. Click Configuration > Network
Configuration > Network Setting > Edit > VLAN to display the following screen.
Figure 38 Configuration > Network Configuration > Network Setting > Edit > VLAN
The following table describes the items on this screen.
15.2.4 The Edit Default Gateway Screen
Click Configuration > Network Configuration > Network Setting > Edit > Default Gateway
to display the following screen.
Figure 39 Configuration > Network Configuration > Network Setting > Edit > Default Gateway
Table 26 Configuration > Network Configuration > Network Setting > Edit > VLAN
ITEM DESCRIPTION
VLAN
Enable Select this to enable the VLAN function.
Name Display the name of a network interface.
VLAN ID Click the drop-down menu to select VLAN ID.
Priority Click the drop-down menu to select Priority.
Back Click Back to return to the previous screen.
Apply Click Apply to save the changes.
Reset Click Reset to discard the changes.