Filter
Top Products
Chapter 15 Network Setting
UNS Series User’s Guide
59
Figure 36 Configuration > Network Configuration > Network Setting > Edit > IPv4
The following table describes the items on this screen.
15.2.2 The Edit IPv6 Screen
Click Configuration > Network Configuration > Network Setting > Edit > IPv6 to display the
following screen.
Table 24 Configuration > Network Configuration > Network Setting > Edit > IPv4
ITEM DESCRIPTION
IPV4 Setting
Name Display the name of a network interface.
DHCP By default, DHCP is selected.
BOOTP Select BOOTP radio button to acquire an IP address automatically.
Static Select Static radio button to specify an IP address manually.
Address Enter the new IP address for the network setting.
Mask Enter the new mask address for the network setting.
Gateway Enter the new gateway address for the network setting.
Back Click Back to go to the previous screen.
Apply Click Apply to save the changes.
Reset Click Reset to change the screen to the default settings.