ZyXEL Communications UNS Series Barcode Reader User Manual


 
Chapter 22 LUN
UNS Series User’s Guide
97
Figure 71 Configuration > Storage Configuration > LUN
2 Click LUN Attach to display the following screen.
Figure 72 Configuration > Storage Configuration > LUN Attach
3 In the Volume name field, click the drop-down menu and select a pre-existing volume.
4 In the Target (iSCSI node ID) field click the drop-down menu to select target number (0 - 63).
5 In the LUN field, select the LUN number (1 - 254) from the drop-down list.
6 In the Permission field, select a permission level to assign the new LUN scheme (Read-write:
default).
7 Click Apply to save the new changes. Alternatively, click Back to return to the previous menu or
Reset to discard the changes.