Filter
Top Products
Chapter 15 Network Setting
UNS Series User’s Guide
58
The LAN1 port is the network port for downloading QCentral software via HTTP. The port does not
support the WebDAV service or link aggregation to other LAN ports--GbE and 10GbE LAN ports
cannot be aggregated.
15.2.1 The Network Setting Edit Screen
The Edit function allows you to modify the properties of each network interface. Click the
Configuration > Network Configuration > Network Setting > Edit to begin the process.
15.2.1.1 The Edit IPv4 Screen
Click Configuration > Network Configuration > Network Setting > Edit > IPv4 to display the
following screen.
IPV4 Type IPv4 address mode:
• Static: means static IP addresses.
• DHCP: means dynamic assigned IP addresses.
IPV4 IP IPv4 addresses.
IPV4 Gateway Gateway that uses IPv4 address.
IPV6 Type IPv6 address mode:
• Static: static address.
• Auto: RA (router advertisement calculated address.)
•DHCP: DHCPv6 assigned address.
IPV6 IP IPv6 addresses.
IPV6 Gateway Gateway that uses IPv6 address.
MTU Maximum Transmission Unit. By default, MTU is 1500
MAC Address Display MAC addresses.
Modify
Edit Click Edit to configure the following settings: IPv4, IPv6, VLAN, Default Gateway
and Jumbo Frame.
Create Link Aggregation Click Create Link Aggregation to combine multiple connections to create a
parallel bond.
Table 23 Configuration > Network Configuration > Network Setting (continued)
LABELS DESCRIPTIONS