ZyXEL Communications UNS Series Barcode Reader User Manual


 
UNS Series User’s Guide 67
CHAPTER 17
IP Filter Setting
17.1 Overview
This chapter provides information for the IP Filter Settings in Configuration.
17.2 IP Filter Setting
The IP Filter Setting option is used for accessing IP Filter Setup and IP Filter Rule which offers
the basic firewall function. Click Configuration > Network Configuration > IP Filter Setting to
display the following screen.
Figure 43 Configuration > Network Configuration > IP Filter Setting
The following table describes the items on this screen.
Table 31 Configuration > Network Configuration > IP Filter Setting
ITEM DESCRIPTION
IP Filter Setup
Status Select Enable to activate IP filter function. By default, Disable is selected.
Filter policy Select Allow to allow IP addresses defined in IP Filter Rule. By default, Deny is selected.
IP Filter Rule
Add IP Filter
Rule
Click Add IP Filter Rule to define a new IP filter rule.
Filter Rule Displays the ID number for the filter rule.
Start IP
Address
Displays the starting IP address for this filter rule.
End IP Address Displays the ending IP address for this filter rule.
Modify