Filter
Top Products
Chapter 15 Network Setting
UNS Series User’s Guide
62
The following table describes the items on this screen.
15.2.5 The Jumbo Frame Edit Screen
Click Configuration > Network Configuration > Network Setting > Edit > Jumbo Frame to
display the following screen.
Figure 40 Configuration > Network Configuration > Network Setting > Edit > Jumbo Frame
The following table describes the items on this screen.
15.2.6 The Create Link Aggregation Screen
Click Configuration > Network Configuration > Network Setting > Create Link
Aggregation to display the following screen.
Table 27 Configuration > Network Configuration > Network Setting > Edit > Default Gateway
ITEM DESCRIPTION
Set Default Gateway
Name Display the name of the default gateway network.
IPv4 Default:
Gateway
Select Enable to set the gateway as default for IPv4 addresses.
Select Disable to deactivate this function.
IPv6 Default:
Gateway
Select Enable to set the gateway as default for IPv6 addresses.
Select Disable to deactivate this function.
Back Click Back to return to the previous screen.
Apply Click Apply to save the changes.
Reset Click Reset to discard the changes.
Table 28 Configuration > Network Configuration > Network Setting > Edit > Jumbo Frame
ITEM DESCRIPTION
Set Jumbo Frame
Name Displays the name of the jumbo screen network.
Select Enable to allow the network to handle jumbo frames.
Select Disable to deactivate this function.
Back Click Back to return to the previous screen.
Apply Click Apply to save the changes.
Reset Click Reset to discard the changes.