Filter
Top Products
Configuring the NBX 1105 Attendant Console 163
3 Enter the number of an extension you have previously removed in the
Extension field.
4 Enter a name for the extension in the Name field.
5 Click OK.
Changing the Name
of a Call Park
Extension
You can change the name of any Call Park extension.
To change the name of an extension:
1 Select NBX NetSet >
Device Configuration > Call Park.
2 Select the extension name that you want to change. Click Modify. The
Modify Call Park dialog box appears.
3 Enter the new name for the Call Park extension in the Name field.
4 Click OK.
Removing a Call Park
Extension
You can remove a Call Park extension at any time.
To remove a Call Park extension:
1 Select NBX NetSet >
Device Configuration > Call Park.
2 Select the extension that you want to remove.
3 Click Remove. You are prompted to confirm that you want to remove this
extension.
4 Click Yes.
To replace any extension that you remove, see “
Adding a Call Park
Extension” on page 162.
Configuring the
NBX 1105
Attendant Console
The NBX 1105 Attendant Console provides extended button mappings
and displays the current status of each extension. A receptionist typically
uses the Attendant Console to connect incoming calls to telephone
extensions.
This section describes how to configure the Attendant Console manually.
Alternatively, you can use Auto Discovery to add and configure the device
automatically, and then use the manual configuration procedures in this
section to fine-tune your mappings.