Filter
Top Products
Configuring the NBX 1105 Attendant Console 171
Line / Extension You can map a button to the extension of another
telephone (to create a Busy Lamp/Speed Dial), a line card
port extension (external line), an Analog Terminal Adapter,
an Analog Terminal Card port, or a Call Park extension (to
park a call or to pick up a call parked at that extension).
Number — Enter a number:
■ For a telephone extension, enter the extension number.
■ For an external line, enter the full telephone number
associated with the incoming line.
■ For an Analog Terminal Adapter or an Analog Terminal
Card port, enter the extension associated with the ATA
or the ATC port.
■ For Call Park, enter a Call Park extension.
To park a call, you must first press the Call Park button
(mapped by default NBX Business Telephones), and then
press the button that is mapped to a particular Call Park
extension:
■ SuperStack 3 NBX: 6000–6099 (See note 1)
■ NBX 100: 601–609 (See note 2)
Prty (Priority) — Enter a number to identify which button
has precedence. The button with the lowest value becomes
active when you lift the receiver or press the Speaker
button.
Note 1: The Superstack 3 NBX is shipped with a factory
default 4-digit dial plan. If you import any 3-digit plan, you
must manually specify any 3-digit extension ranges that are
not set by the imported plan.
Note 2: The NBX 100 is shipped with a 3-digit dial plan. If
you import any 4-digit plan, you must manually specify any
4-digit extension ranges that are not set by the imported
plan.
MWI Assigns the Message Waiting Indicator to this button. The
lamp next to the button lights when you have a message in
your mailbox.
Number — Enter the voice mailbox number (telephone
extension).
Prty (Priority) — Not used.
Table 30 Feature Button Mappings (continued)
Function Description