Filter
Top Products
Connecting and Managing Analog Devices 201
The extensions that are assigned to these ports by the NBX system may
not be in order. For example, if the NBX system assigns extensions 7258,
7259, 7260, and 7261 to the ATC ports, it might assign 7258 to port 3.
To determine the extension assigned to any port on a 3C10117C ATC:
1 Click the ATA tab.
2 Look for the combination of MAC address and port number that you
want. The extension associated with the port is in the first column (Ext.).
After you have added the Analog Terminal Card, you can configure the
parameters for each of the four ports. See “
Modifying an Analog
Terminal Port” on page 203.
Adding an Analog
Terminal Adapter
(ATA)
To add an Analog Terminal Adapter (ATA) to the NBX system:
1 Select NBX NetSet >
Device Configuration > ATA.
2 Click Add. The Add ATA dialog box appears.
3 Fill in the fields in the Add ATA dialog box. Table 38
describes each field.
Table 37 MAC Addresses of Analog Terminal Card Ports (3C10117C)
Card or Port MAC Address
Analog Terminal Card 00:e0:bb:00:f8:c8
Port 1 00:e0:bb:00:f8:c8[1]
Port 2 00:e0:bb:00:f8:c8[2]
Port 3 00:e0:bb:00:f8:c8[3]
Port 4 00:e0:bb:00:f8:c8[4]
Table 38 Add ATA Fields
Field Purpose
MAC Address The MAC hardware address of this ATA, recorded during
installation of the ATA. The MAC address appears on the
label on the bottom of the ATA.
Channel Number This does not apply to a single-port ATA.
Device Name A name to help identify this ATA.
Class of Service A Class of Service for users of this device.