Filter
Top Products
Configuring and Managing Analog Line Card Ports 187
If you remove a line card from the system, the port information remains in
the database. The extension numbers assigned to the four ports do not
become available for reuse unless you use the NBX NetSet utility to
remove the line card from the configuration database.
This section covers these topics:
■ Configuring a Line Card Port
■ Modifying a Line Card Port
■ Removing a Line Card Port
■ Verifying Line Card Port Status
■ Rebooting a Line Card Port
■ Advanced Settings
Configuring a
Line Card Port
When you configure a line card port, you can assign it as a member of a
line pool.
You can configure a line card port automatically (recommended) or
manually.
Verify that you have chosen a 3-digit or 4-digit dial plan before you begin
to configure line card ports. See Chapter 2
.
Configuring a Line Card Port Automatically
To configure a line card port automatically:
1 Select NBX NetSet > System Configuration.
2 Click
System-wide. The System Settings dialog box appears.
3 Enable the
Auto Discover Line Cards check box.
4 Click
OK.
Configuring a Line Card Port Manually
Most organizations use Auto Discovery to automatically configure line
card ports. However, you can configure a line card port manually and
select all settings.
To configure a line card port manually:
1 Select NBX NetSet >
Device Configuration > Line Card Ports.
2 Click Add.