Filter
Top Products
84 CHAPTER 2: DIAL PLAN
for Dallas, the IP address is 192.168.35.100. You must use the asterisk (*)
character to separate fields within the IP address and to separate the IP
address from the destination extension.
Example: Dial Plan with Site Codes
In Figure 9
, each of the three sites uses the same extension range. In the
Internal table in the Chicago system dial plan, the entries shown in
Figure 11
select route 522 and 523 if a user dials the site codes 62 and 63
respectively, and then dials an extension. The dial plans for the Atlanta
and Dallas NBX systems would contain similar, but not identical entries.
An explanation of each line in the dial plan follows Figure 11
.
Figure 11 Sample Dial Plan Entries for Chicago Using Site Codes
The first TableEntry Create command creates entry 100 in Table 1. This
assumes that the highest previous entry in Table 1 was 99 or lower. Entry
100 watches for the 2-digit sequence 62 followed by a 4-digit extension
and specifies route 522 whenever a user dials such a 6-digit (Min = 6 and
Table Create 1 Internal 4 Digit Extensions
/ Id Entry Digits Min Max Class Prio Route
/ -- ----- ----------- --- --- ------------- ---- -----
TableEntry Create 1 100 62 6 6 WAN 0 522
TableEntry Create 1 101 63 6 6 WAN 0 523
/ Route Description
/ ----- -----------
DestinationRoute Create 522 Atlanta VTL Connection
DestinationRoute Create 523 Dallas VTL Connection
/ Route Entry DestinationExtension
/ ----- ----- --------------------
DestinationRouteEntry Create 522 1 *0006
DestinationRouteEntry Create 523 1 *0006
/ Route Entry OperId Operation Value
/ ----- ----- ------ --------- -----
DestinationRouteOperation Create 522 1 1 stripLead 2
DestinationRouteOperation Create 522 1 2 prepend 192*168*25*100*
DestinationRouteOperation Create 523 1 1 stripLead 2
DestinationRouteOperation Create 523 1 2 prepend 192*168*35*100*