Filter
Top Products
182 CHAPTER 3: DEVICE CONFIGURATION
Do Not Disturb Maps the Do Not Disturb function to this button.
Pressing the button the first time turns on the Do Not
Disturb functions and prevents incoming calls from
ringing on the telephone. The words DO NOT DISTURB
appear in the telephone’s display panel.
Pressing the button again disables the Do Not Disturb
function and returns the telephone to normal operation.
The words DO NOT DISTURB disappear from the
telephone’s display panel.
When the user enables Do Not Disturb and the telephone
is part of a hunt group, calls to the hunt group ring on
the telephone, but calls directed specifically to the
telephone do not.
NOTE: Under the following circumstances, users must
use Feature Code 446 to disable Do Not Disturb on the
telephone:
Example:
■ You map Do Not Disturb to a button on an NBX
telephone. It does not matter whether you do this for
the individual telephone or for the telephone group to
which the telephone belongs.
■ The user presses the mapped button and enables Do
Not Disturb. The status light beside the button turns
on.
■ You unmap the button. It does not matter whether
you unmap it for the individual telephone or for the
telephone group.
■ The status light beside the button on the user’s
telephone goes out when you unmap the button.
■ The Do Not Disturb function remains in effect on the
telephone.
■ If the user presses the previously mapped button,
nothing happens.
■ To remove Do Not Disturb from the telephone, the
user must press the Feature button and then dial 446.
Table 31 Attendant Console Button Mappings (continued)
Button Type Description