Filter
Top Products
168 CHAPTER 3: DEVICE CONFIGURATION
Table 30 Feature Button Mappings
Function Description
Account Code Allows you to map the account code function to this
button. Account codes allow you to keep track of calls
associated with a particular client or account. The codes
appear in Call Detail reports.
To use the function while you are on a call, press the
button, enter the account code you want, and press the #
key.
Number — Not used.
Prty (Priority) — Not used.
CLIR-All Assigns Calling Line Identity Restriction to this button.
When you press the button, all subsequent ISDN calls made
by from this telephone no longer contain CLIR information.
If the button has a light beside it, pressing the button
causes the light to turn on.
To turn off CLIR-All, press the button again. The light turns
off.
Normally, when an ISDN call is made, the identity of the
caller is provided to the PSTN and may be seen by the called
user if they subscribe to the Caller-ID service. CLIR allows
you to withhold this information from the called user.
NOTE: Enabling CLIR-Next does not cause the lamp to
light.
Number — Not used.
Prty (Priority) — Not used.
CLIR-Next Assigns Calling Line Identity Restriction to this button.
When you press the button, the next ISDN call made from
this telephone does not contain CLIR information.
If the button has a light beside it, pressing the button does
not cause the light to turn on.
After you complete the call and hang up, CLIR-Next
becomes inactive.
Normally, when an ISDN call is made, the identity of the
caller is provided to the PSTN and may be seen by the called
user if they subscribe to the Caller-ID service. CLIR allows
you to withhold this information from the called user.
Number — Not used.
Prty (Priority) — Not used.