Filter
Top Products
7-4 Troubleshooting Chapter 7
3. While holding the operation panel, remove the document.
❑ Pull it in either direction, but do not force it.
❑ If a multipage document is loaded, remove the entire document from the
ADF.
4. When you are finished, close the operation panel by pressing it down from the
center.
5. Press Resume to clear the error message, then start the operation again. Be
sure to fan and stack your document and replace the stack in the ADF.
If the paper does not pull out easily, do not force it. Call the Canon Customer
Care Center (see page 1-9).
Be sure to close the operation panel until it locks into place. Otherwise the unit
will not function properly.
n
n
Resume