Filter
Top Products
Preface
vii
Users in Canada
PRE-INSTALLATION REQUIREMENTS FOR CANON FACSIMILE
EQUIPMENT
A. Location
Supply a suitable table, cabinet, or desk. See
Appendix A
for the unit’s
dimensions and weight.
B. Order Information
1. Only a single line, touch-tone or rotary telephone set terminated with
a standard 4-pin modular phone plug. (Touch tone is recommended if
available in your area.)
2. Order an RJ11-C modular jack (USOC code), which should be
installed by the phone company. If the RJ11-C jack is not present,
installation cannot occur.
3. Order a normal business line from your telephone company’s business
representative. The line should be a regular voice grade line or
equivalent. Use one line per unit.
DDD (DIRECT DISTANCE DIAL) LINE
-or-
IDDD (INTERNATIONAL DIRECT DISTANCE DIAL) LINE IF YOU
COMMUNICATE OVERSEAS
n
Canon recommends an individual line following industry standards, e.g. the
2500 (Touch Tone) or 500 (Rotary/Pulse Dial) telephones. A dedicated
extension off a PBX without “Camp On” signals is also permissable with your
MultiPASS. Key telephone systems are not recommended because they send
non-standard signals to individual telephones for ringing and special codes,
which may cause a fax error.