Filter
Top Products
Chapter 4 Sending Faxes 4-17
Sending Faxes
❑ Regular dialing
Use the numeric buttons to enter the fax number, then press
Set to add the
number to the broadcast list.
● You can only enter one fax number this way.
4. Press Start/Scan to begin scanning for sending, or wait a few seconds for the
MultiPASS to begin scanning automatically.
❑ The MultiPASS then scans the document into memory, and begins
sending it to the destinations.
❑ You will see a series of brief messages showing details on the transmission.
❑ To cancel sending, press Stop. You will be asked to confirm canceling.
Press T to cancel. Sending to all destinations you specified in step 3 will be
canceled. (You cannot cancel only one destination.)
● If you enter the wrong destination, press Function, then Clear. Then press
Function again, and enter the correct destination.
● You must dial the second number within five seconds of dialing the first
number. All subsequent numbers must be dialed within 10 seconds. If you
wait longer than the time-out interval before dialing the next number, the
unit will start scanning the document. You can turn off the time-out interval
using the MultiPASS Fax Setup Utility (the “Auto Start and Send” option) or
the operation panel. If you are using the MultiPASS Fax Setup Utility, see the
online MultiPASS Desktop Manager Software Guide. If you are using the
operation panel, see the online Standalone Fax Manual.
● If you want to review the numbers you entered, press Function and use d or
u to scroll through the numbers.
GHI JKL MNO
ABC DEF
TUV WXY
OPER
Tone
SYMBOLS
PRS
1
0#
7
8
9
45
6
2
3
Set
➔
n
Start / Scan