Filter
Top Products
6-30 Maintenance Chapter 6
Transporting the MultiPASS
Whenever you plan to transport the MultiPASS, you need to prepare it so it will not
be damaged during the move.
1. DO NOT remove the BJ cartridge from the unit.
2. Make sure the cartridge holder is in its home position on the right side of the
unit.
❑ If it is not in its home position, press the cartridge button (inside the
unit.
3. With the cartridge holder on the right side of the unit, tape the BJ cartridge
and cartridge holder to the side of the unit.
4. Disconnect the power cord.
5. Disconnect the telephone, extension phone or answering machine (if using
them), the telephone line, and the USB to Parallel cable to the Macintosh.
6. Remove the document support.
7. Make sure the document tray is closed.
8. Replace all tapes and shipping materials you removed when you first unpacked
the MultiPASS.
9. Pack the MultiPASS and all its components into its original shipping carton.
● Do not remove the BJ cartridge from the MultiPASS or ship a BJ cartridge or
a BJ tank from which you have removed the protective cap. An opened BJ
cartridge or BJ tank that is not installed in the MultiPASS or the Ink
Cartridge Storage Box may leak, and the print head may dry out. Also, if you
do not tape the BJ cartridge to the side to the unit, ink may spill into the unit.
● If you no longer have the shipping carton your MultiPASS came in, pack the
unit in a suitably sized, sturdy cardboard box, using bubble wrap or other
suitable packing materials. (If you use foam peanuts, be sure to wrap the unit
in plastic first to prevent the packing materials from entering any opening on
the unit.)
n